BRS 4 Stage Value 75GPD RO/DI System
BRS 4 Stage Value 75GPD RO/DI System
1 in stock
BRS 4 Stage Systems are perfect for reefers who have water treated with chlorine or relatively clean well water. The 4 stage systems are self-contained on a single bracket making them ideal for tight spaces or where a non-permanent connection may be required. Installing a RO/DI system only takes a few minutes and can be done very easily without any permanent modifications to your home or the plumbing.
4 Stage Value RO/DI Features:
- Multiple source water connections
- Mur-lok Push Connect dual EPDM O-Ring fittings
- 10 Ft Each of 1/4" Blue, Red and Black Tubing
- Pre-installed NSF Certified Filters
4 Stages of Filtration
Stage 1
Purtrex 5 Micron Depth Sediment Filter
Sediment filters trap debris and other free-floating particles that would normally clog expensive carbon blocks and foul membranes. Purtrex filters are a true depth filter with a graded density that progressively gets tighter through as water passes through the filter allowing them to last longer than the competitors.
Stage 2
BRS 5 Micron VOC Block
Our VOC carbon blocks are specially formulated to remove and reduce chlorine and volatile organic compounds from household water.
Stage 3
75 GPD Dow Filmtec Membrane
DOW is hands down the industry leader for residential RO membranes. The 75 GPD Filmtec membrane can remove up to 99% of contaminants from traditional household drinking water. All membranes do require pressure to operate correctly, and DOW's membrane only requires 50 PSI of feed pressure to operate efficiently.
Stage 4
Nuclear Grade Color-Changing Deionization Resin
Deionization resin is the final stage of the RODI system and will polish your water down to 0 TDS. The DI resin is a mixed bed with a color changing indicator to let you know when it is becoming depleted. The resin starts as a dark blue color that will turn gold when as it becomes exhausted and is a good indicator to let you know when to it should be replaced.
4 Stage Value RO/DI System Recommended Conditions:
- Minimum Water Pressure - 50 PSI
- Max Water Pressure - 90 PSI
- Recommended Water Temperature - 77°F
- Recommended Max TDS - <300ppm
Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production of product water, with excess production of waste water. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.
*DOW Filmtec 75 GPD Membranes have a 96% - 99% typical stabilized salt rejection rate that can be reproduced through the following conditions;
- Source Water Pressure - 50 PSI / Membrane
- Source Water Temperature - 77°F
- Source Water TDS - 250ppm Softened Tap Water
- Recovery - 15%
- Minimum Salt Rejection - 96%